Salient Features:

• Heavy duty square GMP Model.
• C.I. Body and C.I. Middle plate
• Paint free tablet manufacturing zone.
• Turret of Special Grade S.G. Iron casting
• Upper punch penetration system.
• Electronic. Digital Tablet cum RPM Counter.
• Inter lock switches to all Guards.
• Lower Guard of polished Stainless Steel & Upper Guards of Acrylic Material.
• Aluminum Turret Guards
• Effective Dust Extraction Nozzles.
• Imported needle roller bearing provided at the bottom of turret.
• Fix type Speed pulley, One shot Lubrication System and Anti Vibrating mount.
• Reverse direction motion protection is provided to avoid accident.
• The machine is provided with extra hand wheel for easy punch loading.
• The machine is available with AC variable Drive & Electromagnetic Clutch (Optionally)
• The machine is available with poly carbonate upper guards (Optionally).
• The machine is available with auto lubrication pump (Optionally).

Technical Specifications

Machine Type		SBP3SH-8	SBP3SH-12
No. of Stations		8	12
Output - Tablets/Hr.	12 RPM	5760	8640
	22 RPM	10560	15840
Max. Operating		12 Tons	12 Tons
Max. Tablet Dia.		40 mm	40 mm
Maximum Depth of fill		30.0 mm	30.0 mm
Upper Punch Penetration		1.5 - 8 mm	1.5 - 8 mm
Main Electric Motor		5 HP / 930 RPM	5 HP / 930 RPM
		3 Phase, 440 v.	3 Phase, 440 v.
Overall H X W X D (Approx)	98 x 102 x 182 H
Net Weight (Approx)	1100 kgs

Tray Dryer Steam Operated 30'c To 100'c G.M.P. Model With MS Powder quoted Externals & S.S. 316L Internals

Application :-

1) Construction : external:2mm thk internal: 2mm thk moc: gmp

2) Surface Finish: external: powder quoted, internal: mirror finish.

3) Inlet & Outlet: All dryers have a 5 micron pre filter at the inlet and a manually infinite adjustable damper at the outlet.

4) DOOR: Doors at provided at the front side of the dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.

5) Air Circulation: Air circulation is done by specially designed recirculation blowers inside the dryer. The blower capacity, static & design depends on the size and model of dryer.

6) Heating: Dryers are normally supplied with electric heating system. Suitable heating coils are provided in the dryers.

7) Temperature Control: Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.

8) Trays: Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish.

9) Control Panel: Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, CKT breakers, indicating lamps, push buttons , timers, controllers etc.

Technical Specifications

MODELS	TD-14
Loading capacity	14 Trays
No of Doors	One
No of Blowers	One
No of motors/H.P.3 PHASE 415 VOLTS.	1/0.5 H.P.3 phase 415 volts
Electrical Heating Load for100°C	6kw
Steam Heater No. of coils.	2
Insulation in mm100°C	50
No of Trolleys	Rack System
Tray Size	812 X 406 X 31
Trolley Dimension	Fixed Racks

• The SS- stainless steel model, body.
• Is fabricated made out of AISI304Q. Material. The STD-standard model, body is fabricated made out of mild steel duly hard chrome plated body.

OUT PUT:

• 8000 capsule per/ hour for capsules size 00to 5 for 300 hole M/C.
• Depending on formulation and operator skill.

Interchangeability

The machine is manufactured to suit the following capsule size combination 00/0/1/2/3/4 or 5.

Salient Features:

• Simple to operate, can be handled by unskilled labour.
• All the loading plates are made out of ALSL 304 Q. material.

	300 – Holes
Length	405mm
Width	300mm
Height	455mm
Weight	40.00 kg

Application:

Product is feed to the operating area of a rotor, having a speed of 2800 R.P.M by specially designed feed device. The product is processed by high sheer, pressure and friction between the stator and rotor, the angular gap becomes narrower towards the discharges section. This processed product continuously leaves the mill through the drain pipe, if required, it can be recirculated.

Salient Features:

• All contact parts can be easily and quickly dismantled and cleaned.
• Machine is designed for continuous operation.
• Cylindrical screen for higher output.
• Flame proof electrical can be provided at extra cost.

Technical Specifications

MODEL NO.	SBCM-1
PARTICLE SIZE REDUCTION	5 TO 10 MICRONE
HOPPER CAPACITY	5 LTRS
MOTOR	0.5 H.P. 2820 R.P.M. 440 V. 50 HZ / 3 PH

We are engaged in manufacturing, supply and export of high standard “Bhagwati”planetary mixers, that are used for intimate & homogeneous mixing of various products, including ointments, creams, lotions, toothpastes, pharmaceutical creams, cosmetic creams, ceramics, color pigments, ink pastes, compounds, adhesives etc in sterile & non-sterile conditions.

The product container of these mixers contains jacket to heat and cool for circulation of steam / cold water. Mixer can also be operated under vacuum to remove air entrapment in the product during mixing process. High speed disperser is compatible for homogenizing the product with independent drive at the center of top dish.

Highlighting Features:

• Product bowl mounted on caster wheels for easy portability, washing and transporting mixed materials.
• Jacketed bowls available for heating & cooling of products during mixing
• High speed emulsifier provided for homogeneous Mixing and producing lustrous products
• Scrapper of suitable design to avoid localized heating or cooling and ensure uniform mixing
• Optional flameproof construction
• Motorized drive assembly for lifting & lowering.
• Needs comparatively smaller area for installation.
• Contact parts of SS 316 construction.
• Electrical control panel with back up fuses and indicator lamps for easy process control.

Tube Filling Machine Aluminium / Laminated & Plastic Tube Filling Machine
Semi- automatic/automatic rotary tube filling, crimping & coding machine for collapsible aluminium tubes single /double head:

Consists Of

One rotating disc with interchangeable tube holding sockets for different sizes of tubes
One S. S. filling syringe pump with Teflon rings, one S. S. filling nozzle connected to control of Tailing", No-Tube No-Fill micro switch, One 20 Litres capacity S. S. hopper for paste / ointment, One S. S. block with non-return valve, volume track with fine adjustment and accuracy of +/- 0.1%
Filing range: From 3gms to 50 GMS.

SBTF-AU-30	SBTF-AU-45	SBATF-AU-45	SBATF-AU-70
Single head	Double head	Single head	Double head
GMP Model	GMP Model	GMP Model	GMP Model
Output : 30-40	Output : 40-50	Output : 40-50	Output : 50-60