Operation: The Ribbon Blender is an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. Approximate two third of the volume of the container of ribbon blender is filled to ensure proper mixing. The ribbon blender gives best result for mixing of dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Material should be charge from the top side. There are port/ports should be provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom side at center of the container. The discharge height could be adjust as per the requirement, so that material gets discharge in the other container directly, so that material handling time for discharge is nil and the operation is dust free. In Ribbon Blender the powder moves from center to the end of container and end of container to the center of container. Hence requirement of total mixing time is very less and the RPM required are also very less. The dry material gets sufficient contineous movement due to the shape & movement of ribbon & shape of the container., which moves material for good quality of blending. The unit is consist of one electrical motor, one worm reduction gear, belt drive between motor and gear, couple drive between gear to ( ribbon ) mixing stirrer. Container having four nos. of legs with discharge valve & top cover. Both end of mixing shaft is sealed with bush & PTFE gland housing & safety guards are provided on all moving parts.


Salient Features :

• The shape of container and mixing stirrer gives sufficient continuous movement to the powder / granules, result in good quality.
• All contact parts are made out of SS304/SS316 quality material.
• Maximum care has been taken to ensure safe operation of the unit.
• Inching facility for stirrer for discharge of material. • Full cover on top side of the container.
• Discharge height must be adjusted, if confirm with order.
• Operating panel provided for safe operation of blender.
• Centrally located material Discharge valve.
• Dust proof top cover with window provided.
• General structure completely made out of mild steel & painted in Standard Model & the same is claded with SS304 in GMP model.
• Safety Guards & Covers made out of SS304 in GMP Model & made out of mild steel in Standard Model.
• Legs made out of M.S & painted in Standard Model & same will be claded with SS304 in GMP Model.
• Automatic control Panel provided with the machine.

Capitalizing upon sophisticated infrastructure, we manufacture, supply and export “Bhagwati” double cone blender, which is an efficient and versatile machine for homogeneously mixing the dry powder and granules. All the contact parts of these blenders are made out of stainless steel of the highest grade. 2/3rd of volume of cone blender is filled to ensure appropriate mixing. These blenders are immensely demanded by pharmaceutical, food, chemical and cosmetic industries.

Salient Features :

• The conical shape at both ends enables uniform mixing & easy discharge.
All contact parts are made out of stainless 304 or 316 quality material
• All moving parts covered with SS304 covers
• Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
• Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
• Meticulous attention is paid to ensure safe operation of unit.
• Manual rotating facility with hand wheel for inching
• 2 safety road at back side
• Proper size of butter fly valve at one end of the cone provided for material discharge & hole with open-able cover provided at other end of the cone for material charging & cleaning.
• 1 shaft with 4 fixed buffels with mirror polished provided inside the cone.
• Cone mirror polished from inside & outside and Matt polished structure.

The Octagonal Blender is an efficient and versatile blending machine for mixing and lubrication process of dry granules homogeneously. Two third of the volume of the Cone Blender is filled to ensure proper mixing.

The Octagonal Blender gives best result for granules due to very slow speed and octagon shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. In Octagonal Blender the granules comes from all sides due to the octagonal shape of the product container, hence requirement of RPM is less. Suitable mainly for Crystalline & Granular type material. This type of material gets sufficient continuous movement due to their shape if container have only slow movement and will results in good quality of blending / lubrication of granules.

Salient Features :

• Suitable for dry mixing of products in granule form.
• Easy for loading and unloading of material.
• Easy for cleaning.
• All contact parts are made out of SS 304 / SS 316 or SS 316 L quality material, as per customer requirement.
• The octagonal shape & slow speed of rotating gives sufficient continuous movement to the granules, result in good quality.
• Simple design requires minimum maintenance.
• General structure & safety guards made out of mild steel & coloured in Standard Model and made out of SS 304 & polished to the matt finish in GMP Model.
• Maximum care has been taken to ensure safe operation of the unit.
• Manual rotating facility with hand wheel for inching.
• Bigger size batch at low power consumption.

Other Options Available :

• Contact parts made out of SS316 instead of SS304.
• Flame proof drive motor along with flame proof starter.
• Vacuum Loading facility for material charging.
• Cylindrical container with cone for material charging.

Operation:

The "V" BLENDER is an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously. Approximate two third of the volume of the Blender is filled to ensure proper mixing. The "V" Blender gives best result for powders due to suitable medium speed and "V" shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

In "V" Blender the powders comes from all sides due to the "V" shape of the product container, hence requirement of RPM is medium. Suitable mainly for powder & granules type material. This type of material gets sufficient continuous movement. Due to the "V" shape of container, have only medium movement and will results in good quality of blending/lubrication of granules

Salient Features :

• Suitable for dry mixing of products in powder form.
• Easy for loading and unloading.
• Easy for cleaning.
• All contact parts are made out of SS304 / SS316 or SS316 L quality material, as per customer requirement.
• Simple design requires minimum maintenance.
• General structure & safety guards made out of mild steel & painted in Standard Model and made out of SS304 & polished to the matt finish in GMP Model.
• The "V" shape gives sufficient contineous movement to the granules, result in good quality.
• Maximum care has been taken to ensure safe operation of the unit.
• Manual rotating facility with hand wheel for inching.

Other Options Available :

• Vacuum Loading facility for material charging.
• Flame proof drive motor along with flame proof starter.
• Contact parts made out of SS316 or SS316 L instead of SS304.

Conta Blenders or Container tumblers are used mainly for blending of dry powders for capsule plant, for blending and homogenizing of dried granules for tablet production.

This is a closed and contained system where by a single step transfer material from container of the Conta blender is transferred to the tablet press hopper.

In granulation room the dry granules enter to the container for blending through a dust free connection and the same container is loaded over to the blender for blending. This same container after blending raised over the tablet press for unloading in to the tablet press hoppers.

These granules can be mixed and lubricated in this blender, Main advantage of this system is that it is totally dust free. Also another advantage is adaptability of this system to handle more than one sizes of bunkers or containers. This adaptability makes it a very useful machine for any tablet or capsule plant.